Reference: SH-B017
Direct fit upgrade floating disc for a xXx / MX4 bike!
Reference: SR-F097
Replaces the stock plastic key holder (which cracks easily). Made from Aluminium, CNC machined. Problem solved.
Reference: SR-S009
Material: 6061 T6 Aluminum. Surface: Anodized. Reinforced rear suspension, so that the suspension part can bear huge pressure during driving. The overall thickness is increased to 22mm, and two reinforcing ribs are added for higher strength. Milled and hollowed design enhances the appearance.
Reference: SR-HA017/V1
Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...
Reference: SH-B024
Required to run oversized 250mm brake disc.
Reference: SR-F102
Made without any logo/branding. Only shows the beautiful deep gloss carbon fiber finish.
Reference: SR-HA019
6061 Aluminum CNC machined ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All parts are type 2 anodized. Simple install and includes all mounting hardware.
Reference: SH-B025
Required to run oversized 250mm brake disc.
Reference: SR-F093
Looks much better than stock key. Only need to slide off the rubber grip from the key. Super easy to do. We suggest to add a tiny drop of glue if you feel the key rattling inside. Decorative item.
Reference: SR-S005
Is there play in your rear suspension? Replace those loose and gritty suspension linkage bearings with a DirtyBike off road bearing kit. Kit includes six precision needle bearings and fits all Surron Light Bee and Segway X260/160.
Reference: SH-B013/AL
Front Disc Guard made of 6061 T6 aluminum and 304 stainless steel screws for Talaria / Sur-Ron / Segway electric dirt bike.
Reference: TL-S010
This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.
Reference: SR-HA030
Spacer only! No screws included
Reference: SH-B026
Required to run a 220mm disc on a bike that was originally 203mm. Universal, will fit any E-bike.
Reference: SH-B013/BK
Front Disc Guard made of 6061 T6 aluminum and 304 stainless steel screws for Talaria / Sur-Ron / Segway electric dirt bike.
Reference: TL-S011
This linkage will raise the seat height by 1.6'' (40mm). Recommended for taller riders
Reference: SR-HA025
Everything needed to increase height by 1'' on any direct mount stem.
Reference: SR-HA026
Everything needed to increase height by 1.5'' on any direct mount stem.
Reference: SH-B018
Oversized upgrade floating disc for Sur-Ron Light bee / Segway X260, will require the proper caliper spacers separately. Significant Brake upgrade over stock rotors.
Reference: TL-FA007
This can prevent the frame neck from getting loose (Egg shaped) due to an improper headset tension.
Reference: SR-HA027
Everything needed to increase height by 2'' on any direct mount stem.
Reference: SH-B019
Upgraded 220mm floating disc for a Sur-ron Light bee / Segway x260 bike.
Reference: SH-B012/BK
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: SR-F095
This can prevent the frame neck from getting loose (Egg shaped) due to an improper headset tension.
Reference: SH-B023
Thicker 203mm brake disc - No spacers required!
Reference: SH-B012/AL
Folding CNC Brake lever made of 6061 T6 aluminum. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: SR-F096
Cheap and effective way to hide an Air Tag on your Sur-Ron Light Bee.
Reference: SH-B012/RE
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight. Attention! Talaria Sting MX4 - Only compatible with LBN Brake system similar to the Sting MX3 (Red Caps on the caliper)
Reference: SH-B030
Fits OEM seal (not included). Made for LBN master cylinders only.
Reference: SR-F100
Replaces the stock plastic cover with an elegant, CNC machined aluminium cover.
Reference: SR-S007
Mounting hardware for aftermarket shock on Talaria Sting, Sur-Ron LB-X and Segway X260.
Reference: SH-B012/OR
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight.
Reference: SH-B029
Fits OEM seal (not included). Made for Sur-Ron Light Bee OEM master cylinders only.
Reference: SH-B012/PU
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight.
Reference: SR-F101
Made without any logo/branding. Only shows the beautiful deep gloss carbon fiber finish. Must reuse original locking system and rubber spacer to hold battery in place. double sided tape required (not included) to glue the rubber spacer back into place. Looks much better than original made of plastic!
Reference: SH-B012/BL
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight.
Reference: SR-F105
Made without any logo/branding. Only shows the beautiful deep gloss carbon fiber finish.
Reference: SH-B012/GO
Folding CNC Brake lever made of 6061 T6 aluminum with anodized black surface. Stronger and lightweight.
Reference: TA-B001
Attention! Only suitable with LBN calipers (FAST brakes have different hose fittings). Hydrolic Rear Foot Brake CNC Black for Talaria Sting Made of 6061 T6 aluminum and CNC machined. Surface Treatment: Anodized. Hydraulic master cylinder activates rear brake (replacing hand operated master cylinder). Change the brake to the foot and keep the hand brake....
Reference: TL-S014/BL
Attention! Only suitable for DNM fork.
