Attention! One kit includes 1x oil seal and 1x dust seal from highest quality materials as usual with SKF. Requires 2x kits to rebuild a complete fork!
Reference: 50070-56000-000
Talaria OEM Replacement part.
Reference: 01-04190
A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain. Narrow knobby configuration means less of an environmental foot print on the trail. 4 ply rated. DOT approved. Not intended for extended highway use. All sizes will work for front or rear fitment. 2.85kg / 6.28 lbs
Reference: 13171-56000-000
Talaria OEM Replacement part.
Reference: 341426-15
For use in mineral-based brake and hydraulic systems specifying mineral oils. Developed in collaboration with a premium OEM component manufacturer. Mineral based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids. High boil point and minimal frequency of system bleeds. Zero-fade...
Reference: TL-S011
This linkage will raise the seat height by 1.6'' (40mm). Recommended for taller riders
Reference: 40492-56002-000
Replacement fork seal for the Fastace Fork.
Reference: 40486-56005-000
Does not include set bolt. Need to be purchased separately!
Reference: TL-S010
This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.
Reference: TL-S014/BL
Attention! Only suitable for DNM fork.
Reference: MP-08-0669
Proper tool to install new races, fits most ebikes on the market
Reference: SR-S005
Is there play in your rear suspension? Replace those loose and gritty suspension linkage bearings with a DirtyBike off road bearing kit. Kit includes six precision needle bearings and fits all Surron Light Bee and Segway X260/160.
Reference: WR-018/BK
** This is the V2 version of this linkage. It is built stronger and reinforced compared to the V1. Made from 7075T6 Billet Aluminum. Weights less than Other Aftermarket Risers. Available in Red, Blue or Black
Reference: 40480-56002-000
Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic...
Reference: SR-S009
Material: 6061 T6 Aluminum. Surface: Anodized. Reinforced rear suspension, so that the suspension part can bear huge pressure during driving. The overall thickness is increased to 22mm, and two reinforcing ribs are added for higher strength. Milled and hollowed design enhances the appearance.
Reference: FX-009
Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...
Reference: OSB-42FSV150
Spring & Mounting Bushings included (100% bolt-on) - - - Have a look at our new Stoy 3 model 2022 which will radically transform the behavior of your bike. The Stoy 3 is a lightweight, compact, high performance shock made for enduro, freeride and downhill riding. It offers a wide range of settings, low/high speed compression and rebound, it benefits...
Reference: 40501-56000-000
Necessary to sucessfully install a new fork, can't be re-used from the previous one, and not included in many fork brands.This model will fit most aftermarket forks (Fox, Marzocchi, Manitou, Rockshox, BOS, Arma, Ohlins, SR suntour, etc)Please measure the INSIDE diameter of the steer tube to order the correct unit. (25mm / 0.984'')OEM forks (RST, DNM,...
Reference: 191-38304-A101
An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.
Reference: FX-004
Attention! Fox SLS / Steel spring sold separately. Please choose between 450,500 and 550 lbs. Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Everyone loves a well performing coil shock, as good as air suspension is, nothing can quite compete with the way a...
Reference: FX-011
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Attention! One kit includes 1x oil seal and 1x dust seal from highest quality materials as usual with SKF. Requires 2x kits to rebuild a complete fork!
