Reference: DR-CH10-1
CZEM Drill-One OEM replacement part.
Reference: RE680003
CZEM Drill-One OEM replacement part.
Reference: RC350201
CZEM Drill-One OEM replacement part.
Reference: RC250204
CZEM Drill-One OEM replacement part.
Reference: RC102001
CZEM Drill-One OEM replacement part.
Reference: SR-BE006
6061 Aluminum CNC machined Low Profile ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All Colored parts are type 2 anodized. Silver is Raw. Simple install and includes all mounting hardware.
Reference: RC101001
CZEM Drill-One OEM replacement part.
Reference: SR-BE007
6061 Aluminum CNC machined Low Profile ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All Colored parts are type 2 anodized. Silver is Raw. Simple install and includes all mounting hardware.
Reference: SH-B011/AL
Running our hydraulic rear foot brake and want to keep your stock or aftermarket hand brake? This dual caliper bracket enables the use of 2 independent rear brakes. Machined from 6061 aluminum, this replaces the stock cast bracket and mounts 2 calipers at a 90-degree angle. The second caliber can be stock or any compatible aftermarket caliper.
Reference: RE255070
CZEM Drill-One OEM replacement part.
Reference: SB002
This adapter will allow you to run a bicycle rotor up to 20mm larger than standard size. This is typically used to run the 203 / 223mm Galfer USA oversize brake rotor.
Reference: SB003
This adapter will allow you to run a bicycle rotor up to 63mm larger than standard size. This is typically used to run the 223mm Galfer USA oversize brake rotor.
Reference: DP00001
CZEM Drill-One OEM replacement part. Rises handlebar stem by 10mm if using a direct mount ** you will need longer bolts to secure your direct mount
Reference: BFD426G1053
Suitable for all conditions. Perfectly balanced power and durability. Progressive and consistent braking with better feel. Low noise. Less wear on the brake rotors.
Reference: BFD426G1554
Suitable for extreme terrain, varying weather conditions, or competition use. Perfect for downhill biking or lengthy periods of steady braking. Maximum stopping power in the dirt. High temperature and fade resistance. Great for wet weather and mud performance.
Reference: BFD426G1652
The Galfer E-Bike specific compound was formulated to deal with the unique needs of E-Bikes. They're long lasting and designed to manage heat extremely well given the extra weight associated with heavier bikes, often being ridden faster or downhill. We generally recommend the Pro Compound brake pad for race use or for a rider looking for an aggressive...
Reference: RC310040
CZEM Drill-One OEM replacement part.
Reference: RE255001
CZEM Drill-One OEM replacement part.
Reference: RE600300
CZEM Drill-One OEM replacement part.
Reference: RE600302
CZEM Drill-One OEM replacement part.
Reference: SR-F062
Direct replacement Sur Ron peg brackets 20mm lower than stock geometry. This setup accommodates longer legs as well as a lower center of gravity. 5-axis machined from solid 6061 billet aluminum. Replaces weak stock cast aluminum brackets. Pair includes matching left and right brackets along with a brace for added strength. Strong 0.5” bracket thickness...
Reference: SR-HA014/V1
Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...
Reference: SR-HA015/V1
Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...
Reference: DRL-005
CZEM Drill-One OEM replacement part.
Reference: SR-HA017/V1
Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...
Reference: DB004W2
203mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: DRL-006
The ignition box with a key reduces the possibility of motorcycle theft and does not limit operation or safety in any way.
Reference: SR-HA019
6061 Aluminum CNC machined ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All parts are type 2 anodized. Simple install and includes all mounting hardware.
Reference: DB007W
223mm fixed-mount Galfer rotor for mountain biking. Every high-quality, Galfer-patented Wave rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Seamlessly replaces stock rotor. Full...
Reference: DRL-007
Lower by 4cm for the needs of riders over 190cm. For the highest riders, it is possible to combine lowered footrests with a higher seat.
