Menu
Brands
Active filters
  • Brand: KMC
  • Brand: Matrix
  • Brand: NTC Design
  • Brand: Talaria Factory Suspension
  • Brand: Warp9
Lift Stand Matrix LS1

Reference: 32-08590

Matrix

Lift Stand Matrix LS1

This is the stand for everyone from mini rider to the everyday rider to the professional racer. Easy to transport and store. Easy to use. The easy access 2 point "POWER PEDAL" makes it easy to operate.

Price USD $125.99
Choose
In Stock - Ready to Ship
Elite Stand Matrix M64

Reference: 32-08500

Matrix

Elite Stand Matrix M64

A new milestone in motorcycle stand technology and styling. The M64's revolutionary design delivers the most durable and lightweight motorcycle stand on the market today. The plastic stand is made from a composite blend that is exclusive to Matrix Concepts. The stand is available in seven colorways. The M64 is the ultimate stand that is used, tested, and...

Price USD $118.99
Choose
In Stock - Ready to Ship
-10% -10% Fork Talaria Factory 2.0...

Reference: TL-S002

Talaria Factory Suspension

Fork Talaria Factory 2.0 27.5'' Talaria / Sur-Ron / E-Ride Pro

Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...

Price USD $701.99 Regular price USD $779.99
More
(2)
In Stock - Ready to Ship
ASI BAC4000 controller...

Reference: SR-BE006

NTC Design

ASI BAC4000 controller Mount CNC Aluminum Sur-Ron / Segway

6061 Aluminum CNC machined Low Profile ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All Colored parts are type 2 anodized. Silver is Raw. Simple install and includes all mounting hardware.

Price USD $159.99
More
In Stock - Ready to Ship
ASI BAC4000 controller...

Reference: SR-BE007

NTC Design

ASI BAC4000 controller Mount CNC Black Sur-Ron / Segway

6061 Aluminum CNC machined Low Profile ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All Colored parts are type 2 anodized. Silver is Raw. Simple install and includes all mounting hardware.

Price USD $159.99
More
Out of Stock
Rear Dual Caliper Bracket...

Reference: SH-B011/AL

NTC Design

Rear Dual Caliper Bracket CNC Aluminium Sur-Ron LB-X / E-Ride Pro

Running our hydraulic rear foot brake and want to keep your stock or aftermarket hand brake? This dual caliper bracket enables the use of 2 independent rear brakes. Machined from 6061 aluminum, this replaces the stock cast bracket and mounts 2 calipers at a 90-degree angle. The second caliber can be stock or any compatible aftermarket caliper.

Price USD $119.99
More
Out of Stock
Tie-Downs Matrix M1 (2X)

Reference: 390-8219

Matrix

Tie-Downs Matrix M1 (2X)

Classic 1in nylon tie-downs with top and bottom rubber-coated "S" hooks. Abrasion-resistant nylon webbing. Double-stitched square/cross heavy-duty nylon thread. Straight-pull configuration. 1,200 lb assembly. 400 lb load limit. The secure lock is provided by a heavy-duty steel cam-lock with an extra-heavy-duty steel spring. 69in L x 1in W. Sold in pairs

Price USD $29.99
Choose
Product available with different options
Chain KMC 420 Heavy Duty...

Reference: 24-01015

KMC

Chain KMC 420 Heavy Duty 136 link

For off-road application, chain should be promoted with upgraded steel alloy for all parts, subject to going through exclusive heat-treating process as well, to remarkably reinforce its toughness against rugged terrain riding. KMC employs chromized pin and solid bushing into this chain to boost up its wear endurance and shock absorption to a great extent....

Price USD $17.99
More
In Stock
20mm Lowering Peg Bracket...

Reference: SR-F062

NTC Design

20mm Lowering Peg Bracket Set (With Support Brace) NTC Design CNC Aluminium Sur-Ron / Segway

Direct replacement Sur Ron peg brackets 20mm lower than stock geometry. This setup accommodates longer legs as well as a lower center of gravity. 5-axis machined from solid 6061 billet aluminum. Replaces weak stock cast aluminum brackets. Pair includes matching left and right brackets along with a brace for added strength. Strong 0.5” bracket thickness...

Price USD $149.99
More
In Stock - Ready to Ship
Protective Case for...

Reference: SR-HA014/V1

NTC Design

Protective Case for Eggrider Display NTC-Design CNC Aluminium

Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...

Price USD $72.99
Choose
Out of Stock
Protective Case for...

Reference: SR-HA015/V1

NTC Design

Protective Case for Eggrider Display NTC-Design CNC Black

Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...

Price USD $72.99
Choose
Out of Stock
Protective Case for...

Reference: SR-HA017/V1

NTC Design

Protective Case for Eggrider Display NTC-Design CNC Blue

Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...

Price USD $72.99
Choose
In Stock - Ready to Ship
Protective Case for Nucular...

Reference: SR-HA019

NTC Design

Protective Case for Nucular Display NTC-Design CNC Black

6061 Aluminum CNC machined ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All parts are type 2 anodized. Simple install and includes all mounting hardware.

Price USD $129.99
More
Out of Stock
Back to top

Follow us on Facebook

Facebook