Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version.
Length : 27.5
Travel : 200mm
Offset : 56mm
Fork tube diameter : 38mm
Weight : 11.4 lbs
Adjustments : Compression, Preload and Rebound
Reference: 43535-56000-000
Talaria OEM Replacement part.
Reference: 13555-56000-000
Talaria OEM Replacement part.
Reference: 13213-56000-000
Talaria OEM Replacement part.
Reference: 13555-56000-000
Talaria OEM Replacement part.
Reference: GS-003
We have spent multiple months working with Gates to produce a product to exceed what is currently on the market. After several meetings and test, We have found the optimal belt width for the Sur Ron and Segway is 16 mm, there have been many belts made available in the 17mm width with the thought being that the widest possible fit, will be the strongest,...
Reference: SR-TC110
Premium quality Chain designed for Talaria, Sur-Ron and Segway dirt ebike with 54T Sprocket.
Reference: 40499-56005-000
Reference: 306-37221-A145
Upgraded Handlebar Stem for the Sur-Ron LB-X and Sewgay X260. Please select the Handlebar Stem length. Please Choose from 35-50mm. Orignal Sur-Ron Stem length is 45mm.
Reference: 40492-56005-000
Replacement fork seal for the Talaria Factory Fork
Reference: MP-08-0768
The best tool on the market to remove bearing races easily
Reference: FX-011
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: 40480-56002-000
Lightweight Design-FASTACE is a lightweight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping. Hydraulic Damping System--The hydraulic...
Reference: 40501-56000-000
Necessary to sucessfully install a new fork, can't be re-used from the previous one, and not included in many fork brands.This model will fit most aftermarket forks (Fox, Marzocchi, Manitou, Rockshox, BOS, Arma, Ohlins, SR suntour, etc)Please measure the INSIDE diameter of the steer tube to order the correct unit. (25mm / 0.984'')OEM forks (RST, DNM,...
Reference: WR-018/BK
** This is the V2 version of this linkage. It is built stronger and reinforced compared to the V1. Made from 7075T6 Billet Aluminum. Weights less than Other Aftermarket Risers. Available in Red, Blue or Black
Reference: SR-S009
Material: 6061 T6 Aluminum. Surface: Anodized. Reinforced rear suspension, so that the suspension part can bear huge pressure during driving. The overall thickness is increased to 22mm, and two reinforcing ribs are added for higher strength. Milled and hollowed design enhances the appearance.
Reference: TL-S012
Attention! One kit includes 1x oil seal and 1x dust seal from highest quality materials as usual with SKF. Requires 2x kits to rebuild a complete fork!
Reference: TL-S011
This linkage will raise the seat height by 1.6'' (40mm). Recommended for taller riders
Reference: FX-012
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: TL-S010
This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.
Reference: FX-003
Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Combining ultra-plush coil-like comfort and incredible damping prowess with the light weight of an air spring and an unmatched level of tunability, the Float X2 brings new levels of control and performance to...
Reference: FX-008
Include Drop-Crown (required) and disc brake shim sold separately by Fox. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY. Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. A Grip2 damper with VVC, and an updated EVOL air spring,...
Reference: FX-015
Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...
Reference: OSB-42FSV150
Spring & Mounting Bushings included (100% bolt-on) - - - Have a look at our new Stoy 3 model 2022 which will radically transform the behavior of your bike. The Stoy 3 is a lightweight, compact, high performance shock made for enduro, freeride and downhill riding. It offers a wide range of settings, low/high speed compression and rebound, it benefits...
Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version.
Length : 27.5
Travel : 200mm
Offset : 56mm
Fork tube diameter : 38mm
Weight : 11.4 lbs
Adjustments : Compression, Preload and Rebound
