Dual density handle • Gentle density step block design • Firm density internal compound • Integrated safety channel • Handle ring included
Reference: SB002
This adapter will allow you to run a bicycle rotor up to 20mm larger than standard size. This is typically used to run the 203 / 223mm Galfer USA oversize brake rotor.
Reference: BZT30632
Chain breaker tool by Buzzetti for chains with 415 to 532 pitch.
Reference: ODI-D70DP-R
Designed and tested by multiple time world cup DH Champion Aaron Gwin to meet the rigorous demands of world class downhill racing while also improving aero performance and the overall appearance of the bike.
Reference: 73-3600L
In motion air is forced through multiple air intake vents, then passed through aligned vent channels in the EPS and exits out multiple rear exhaust vents, keeping you cool and comfortable
Reference: 207-24039
Using the same pattern and soff compound as the RC Edition grip, these colorful alternatives will let you customize the look of your bike. Custom Kraton rubber compound provides long wear and tear resistance. Sold in pairs
Reference: 306-37221-A245
On the surface, a stem may look simple, but under that beautiful veneer lies hours of 3D modeling, countless FEA revisions, and tons of real-world ride testing. We do all of this to make sure we have a light, stiff stem that can handle tremendous forces from every conceivable angle. 31.8mm Clamp Diameter. Weight 175g. Hardware Torx, A2 Stainless. Material...
Reference: SR-HA025
Everything needed to increase height by 1'' on any direct mount stem.
Reference: ODI-B01MP/BK
The New Motion Pro DirtControl II Grips were designed by Motion Pro and are manufactured by ODI In California, USA. Made in the USA by ODI Grips, the DirtControl II Slip-On Grips are universal fit to any 7/8” Handlebars.
Reference: SR-HA022
Anodized 6061 T6 aluminum Handlebar Stem. Fixed directly on the upper crown so the installation is stronger. Including: 1pc Handlebar Bracket (With 4 screws)
Reference: 0630-0390
One compound, one pattern, one price in MX (twist throttle). Special U.S.-made compound feels soft, but wears like a harder compound. Custom Moose Racing half-waffle pattern with high-traction chevrons. Safety wire grooves dont interfere with grip comfort. Extra-thick end cap for increased strength. Available in black, red, orange, gray and blue. Made in...
Reference: DO-002
Domino has developed its Potentiometric throttle controls as a reliable product for scooter and small displacement motorcycle applications. The potentiometer’s output is accompanied by that of the “zero throttle” micro-switch to ensure user safety. These throttle controls are designed for stand alone use and for integration within electric or hybrid...
Reference: SR-HA029
Anodized 6061 T6 aluminum Handlebar Stem. Fixed directly on the upper crown so the installation is stronger. Including: 1pc Handlebar Bracket (With 4 screws)
Reference: SR-HA019
6061 Aluminum CNC machined ASI BAC4000 mounting kit for Sur Ron. The bracket fully protects the delicate front of the ASI controller from impacts. Mounts to existing holes on the frame with included aluminum mounting arms (no plastic spacers). All parts are type 2 anodized. Simple install and includes all mounting hardware.
Reference: GS-028
Our first experiences with Sur Ron, Segway, and Talaria left us wanting better ergonomics. To solve that problem we created our own direct-mount stem with a 1.75” rise and a one-piece handlebar clamp to make installation a breeze. This stem riser is a direct fit for Sur Ron, Segway, and Talaria e-bikes and allows you to run your favorite Fat-bars on your...
Reference: SR-HA015/V1
Solid one-piece 6061 billet aluminum protective case for Egg Rider display. This rugged case protects the fragile Egg Rider from damages as well as replaces the plastic bar clamp with an all-aluminum 2 screw clamp (similar to brake lever clamp). Designed and manufactured in the USA. Quick and easy install. Attention! Does not work with the Talaria...
Reference: ODI-H00TL/BK
Constructed from proprietary material compounds that we have spent over 25 years perfecting, the new Troy Lee Designs motocross grips were developed and tested to perform at the highest level of competition. With reinforced ends for durability and a directional pattern that provides additional traction when the rider pulls back, ODI grips are engineered...
Reference: GS-005/BK
The Team at GritShift has been trying to find a functional and appealing direct mount stem with a rise, to help the ergonomics on the Sur Ron, Segways, And Talaria's, we were unsuccessful. So we have created our own! The GritShift Direct Mount Stem Features a 2" rise from the top crown and 1 piece handlebar clamp, this helps ensure everything is square...
Reference: 0635-1751
Specific handguard designed to protect hands from brush, trees, debris, cold, etc. Manufactured with a thermoplastic that is ightweight, compact, and crash-resistant. Universal Mount for all E-BIKE / MTB / MINI DIRTBIKES handlebars. Easy mounts with a flexible collar, not requiring the removal of grips to be mounted. Spoiler (also removable) designed to...
Reference: 301-39634-A001
From day one, we have never stopped pushing the limits of metallurgy and FEA. While the all-new ProTaper MTB aluminum bars have evolved over the years, one thing has remained the same: our original ProTaper concept remains: Thicker at the clamping area, tapered down in low-stress sections.
Reference: 252314-06
6061 Alloy. Includes 3mm, 6mm and 12mm spacer. Deep anodized treatments. Fits 1-1/8" and standard tapered steer tubes
Dual density handle • Gentle density step block design • Firm density internal compound • Integrated safety channel • Handle ring included
