Replacement Front Axle for Talaria Factory (Axle only) Fork Talaria / Sur-Ron / E-Ride Pro

Reference: MP-08-0669

Steering Bearing Installer Motion Pro

Proper tool to install new races, fits most ebikes on the market

Reference: 40492-56002-000

Replacement Seal (1) for Fastace Fork Talaria / Sur-Ron / E-Ride Pro

Replacement fork seal for the Fastace Fork.

Reference: TL-S010

Rear Suspension Linkage +0.8'' (20mm) CNC Black Sur-Ron LB-X / Segway X260

This linkage will raise the seat height by 0.8'' (20mm). Recommended for taller riders.

Reference: SR-S005

Suspension Linkage Bearing kit DB Industries Sur-Ron / E-Ride Pro

Is there play in your rear suspension? Replace those loose and gritty suspension linkage bearings with a DirtyBike off road bearing kit. Kit includes six precision needle bearings and fits all Surron Light Bee and Segway X260/160.

Reference: TL-S011

Rear Suspension Linkage +1.6'' (40mm) CNC Black Sur-Ron LB-X / Segway X260

This linkage will raise the seat height by 1.6'' (40mm). Recommended for taller riders

Reference: OSB-42FSV150

Rear Shock BOS STBX Stoy 3 267x89mm Talaria / Sur-Ron / E-Ride Pro

Spring & Mounting Bushings included (100% bolt-on) - - - Have a look at our new Stoy 3 model 2022 which will radically transform the behavior of your bike. The Stoy 3 is a lightweight, compact, high performance shock made for enduro, freeride and downhill riding. It offers a wide range of settings, low/high speed compression and rebound, it benefits...

Reference: 40499-56005-000

Replacement Fork Protectors Talaria Factory Talaria / Sur-Ron / E-Ride Pro (2)

Reference: 191-38304-A101

Fork Manitou Dorado Expert 27.5'' Talaria / Sur-Ron / E-Ride Pro

An engineering masterpiece The Dorado is our most advanced downhill fork ever! It’s built with 7050 legs, an inverted construction, dual-chamber air springs, and TPC+ damping with independent high-and low-speed compression. Not to mention, hydraulic bottom-out and top-out features and Manitou’s patented HexLock 20mm thru-axle.

Reference: TL-S002

Fork Talaria Factory 2.0 27.5'' Talaria / Sur-Ron / E-Ride Pro

Quality suspension at an affordable price. The fork is adjusted for 170lbs but is also convenient for heavier rider. This is a very good upgrade over RST, DNM and KKE forks. Attention! Since late 2022 the fork as been improved with air valve instead of compression knob. This allow to make the fork much stiffer than the 1.0 version. Length : 27.5 Travel :...

Reference: TL-S014/BL

DNM Fork Axle caps (2) Talaria Sting / X3 / Sur-Ron LB-X / E-Ride Pro

Attention! Only suitable for DNM fork.

Reference: FX-004

Rear Shock Fox DHX2 2022 10.5x3.5 (Spring sold separately) Talaria / Sur-Ron / E-Ride Pro

Attention! Fox SLS / Steel spring sold separately. Please choose between 450,500 and 550 lbs. Include required bushings for Talaria / Sur-Ron / Segway. ATTENTION! ABSOLUTELY NO WARRANTY ON FOX PRODUCTS USED ON TALARIA / SUR-RON / SEGWAY.  Everyone loves a well performing coil shock, as good as air suspension is, nothing can quite compete with the way a...

Reference: FX-011

Rear Shock Spring Fox Steel DHX2 500 Lbs Talaria / Sur-ron / E-Ride Pro

Featuring a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired...

Reference: WR-018/BK

Rear Suspension Linkage Warp9 Sur-Ron LB-X / Segway X260

** This is the V2 version of this linkage. It is built stronger and reinforced compared to the V1. Made from 7075T6 Billet Aluminum. Weights less than Other Aftermarket Risers. Available in Red, Blue or Black

Reference: 40486-56002-000

Replacement Front Axle for Fastace Fork Talaria / Sur-Ron / E-Ride Pro

Does not include set bolts. Needs to be purchased separately!

Reference: TL-S013

Replacement Complete Headset Sur-Ron Light Bee X

Reference: OSB-42FCV

High-End Fork BOS Obsys 42 FCV Talaria / Sur-Ron / E-Ride Pro

Taking the mytic name of the fork that equipped the mountain bikes of Nicolas Vouilloz and Anne-Caroline Chausson during their great years in the downhill world championships, the Bos Suspension Obsys 42 FCV fork has made a very noticed arrival. Our new Obsys 42 FCV dual crown fork shows its impressive characteristics right away. It's built to win.